Help | Contact Us
NukeWorker.com
NukeWorker Menu centrifugal charging pumps

Author Topic: centrifugal charging pumps  (Read 8211 times)

0 Members and 1 Guest are viewing this topic.

wlrun3@aol.com

  • Guest
centrifugal charging pumps
« on: Apr 05, 2007, 11:21 »

   ...millstone 3 (four loop westinghouse 84) has centrifugal charging pumps as opposed to positive displacement...are there others...


Offline Nuclear NASCAR

  • Electrician
  • Forum Administrator
  • *
  • Posts: 938
  • Karma: 3094
  • Gender: Male
  • Everyone needs a Harley. Mine's furry with 4 legs.
Re: centrifugal charging pumps
« Reply #1 on: Apr 05, 2007, 11:25 »
Callaway also has centrifigul charging pumps.  Of course, we're also a Westinghouse 4 loop.
"There is much pleasure to be gained from useless knowledge."

  -Bertrand Russell

Offline Roll Tide

  • Nearly SRO; Previous RCO / AUO / HP Tech / MM1ss
  • Very Heavy User
  • *****
  • Posts: 1876
  • Karma: 1447
  • Gender: Male
  • Those who wait upon God..rise up on eagles' wings
Re: centrifugal charging pumps
« Reply #2 on: Apr 05, 2007, 12:06 »
Sequoyah (4-loop W) also has CCP (PD abandoned years ago).

Turkey Point (3-loop W) still has PD pumps. Maintenance headache.
We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain unalienable Rights, that among these are Life, Liberty and the pursuit of Happiness.
.....
And for the support of this Declaration, with a firm reliance on the protection of divine Providence, we mutually pledge to each other our Lives, our Fortunes and our sacred Honor.

alphadude

  • Guest
Re: centrifugal charging pumps
« Reply #3 on: Apr 05, 2007, 05:40 »
Positive displacment pumps can present a real danger more so than cent. pump. they will pump no matter what even with the down stream valve closed and then KFB.

Offline TENN-1

  • Moderate User
  • ***
  • Posts: 96
  • Karma: 295
  • Gender: Male
  • Finished the 5 year plan in only 34!
Re: centrifugal charging pumps
« Reply #4 on: Apr 07, 2007, 11:55 »
D.C. Cook (four loop Westinghouse) has two centrifugal and one positive displacement per unit. We only run the centrifugal pump but we maintain both CCPs and the PDP. I've been here a decade and a half and have never seen the PDP run.
Things come to those who wait, but usually it's stuff left over from those who hustle!

alphadude

  • Guest
Re: centrifugal charging pumps
« Reply #5 on: Apr 08, 2007, 04:55 »
true dat on those make up pumps, those beasts never tire and only probs i seen was where somebody isolated the seal water while running. they are solid technology from the past

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?