Help | Contact Us
NukeWorker.com
NukeWorker Menu Question regarding the calibration of Keithley Ion Chamber (36150)

Author Topic: Question regarding the calibration of Keithley Ion Chamber (36150)  (Read 9214 times)

0 Members and 1 Guest are viewing this topic.

Irradiated1

  • Guest
First off,

I have a 150 mCi Cs-137 Shepard calibration source I'm working with and is normally used to calibrate GM's. However, I've been asked to attempt calibration of our Keithley Ion Chamber model 36150. I want to achieve 1.0 +/- 20% on all three scales.

Can anyone give me some calculations or ideas on the best method to calibrate this ion chamber? This is a basic calbration and not to be held to ANSI standards.

Thanks in advance

Irradiated1

  • Guest
Well, it seems I have no replies. Does anyone have a copy of the manual for the 31650 they could scan and send me? If you have one send it to cvande2@emory.edu

Anyone know who owns Keithley?

Offline spentfuel

  • Moderate User
  • ***
  • Posts: 125
  • Total likes: 0
  • Karma: 107
  • Tell Recruiters to use NukeWorker.com
Perhaps no one understands your question.

There is no difference in calibrating a gm or ion chamber to gamma in a shepherd.

Place the detector in the proper geometry and distance at what ever value you know and adjust the meter to read what it should at that distance.

For example I have used a shepherd that I know the table dial setting of 200 give me a dose rate of 250 mr/hr I set the instrument there and adjust as needed.  This calibrates the instrument to gamma only.  From my experience to use it for beta also you need a beta source with a known strength at a known distance.  You take a reading and then determine a beta efficiency and appropriate multiplication factors.

open window-closed window times beta correction factor give you a beta dose rate.

I have never heard of the instrument you mention but I have seen the process I describe used at various nuclear plants.

Hope that helps
sf

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2021 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?