Help | Contact Us
NukeWorker.com
NukeWorker Menu Programs for The TI-86 for the CORE Test honeypot

Author Topic: Programs for The TI-86 for the CORE Test  (Read 3188 times)

0 Members and 1 Guest are viewing this topic.

Randy West

  • Guest
Programs for The TI-86 for the CORE Test
« on: May 20, 2009, 10:28 »
Hello,

Does anyone know where I coule get the Conv. Programs for a TI-86 cal. to take the CORE Test?

BetaAnt

  • Guest
Re: Programs for The TI-86 for the CORE Test
« Reply #1 on: May 21, 2009, 07:18 »
Why do you need a program for the core test? You should have the info memorized and it is a multiple guess test.
Look for the best fit and don't stress on the details.

You will do fine, OK? :)

Know your line and point source calcs, decay calcs, and how to use/read a chart of the nuclides. The rest is theory and practice.

GOOD LUCK ON THE TEST. You will do well, just don't freeze and go blank. 8)

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?