Help | Contact Us
NukeWorker Menu Precision Radiation Instruments Model 107 honeypot

Author Topic: Precision Radiation Instruments Model 107  (Read 7101 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
Precision Radiation Instruments Model 107
« on: May 22, 2009, 10:54 »
Hello all,

I wonder of anyone out there is using one of the old Precision Radiation Instruments Model 107C's (more for hobbies than professionally of course). I have one of these  and was was wondered if anyone had converted them to use more common power source than the required mix of two 1.5 volt, one 45 volt and one 67.5 volt batteries. Alternatively, if someone can think of better place for such a question I would be pleased to hear it.

Thanks all.

Tim R


NukeWorker ™ is a registered trademark of ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?