Help | Contact Us
NukeWorker Menu Three Mile Island (TMI)  


Three Mile Island

Above Average
17 (43.6%)
13 (33.3%)
Below Average
9 (23.1%)

Total Members Voted: 12

Author Topic: Three Mile Island (TMI)  (Read 47842 times)

0 Members and 1 Guest are viewing this topic.

Offline Dave Warren

  • Radiological Engineer
  • Very Heavy User
  • *****
  • Posts: 2912
  • Karma: 1574
  • Gender: Male
  • Cubs vs. White Sox in the Series this year.
Re: Three Mile Island (TMI)
« Reply #25 on: Apr 05, 2009, 03:34 »
A buddy of mine is going to the SGRP.
He needs a place to sack out for 9 months.
Anybody got info on a place?

Offline techsavvy

  • Very Lite User
  • *
  • Posts: 5
  • Karma: 4
  • Tell Recruiters to use
Re: Three Mile Island (TMI)
« Reply #26 on: May 06, 2009, 06:20 »
SGT has the SGRP contract, but are NOT paying any diem!!!!!!! It's very hard getting a room because not many hotels will give you a weekly rate. Good luck finding anything reasonable. There are folks being hired in right now, because of the economy, having to take a job with this contractor for the sake of being employed, and it's very hard not having having per diem. Got to go through the union hall to get hired in.
Greed - for lack of a better word - is good. Greed is right. Greed works.
Wall Street, spoken by Michael Douglas

Offline MeterSwangin

  • Moderate User
  • ***
  • Posts: 152
  • Karma: -77
  • Gender: Male
  • Somebody get decon!
Re: Three Mile Island (TMI)
« Reply #27 on: Feb 24, 2010, 07:34 »
Can anybody fill me in on the Nov. 22 release?  I have seen the OE, but am still a bit fuzzy and have a need to know.  Understand a deconner ran a wet vac with no HEPA, but 1) vacuuming what?  Inside a severed RCS pipe?  Why?

And 2) what was unique about the ventilation lineup that spread the airborne so quickly?

And 3) was'nt the ctmt opening monitored with an alarming A/S?  Don't understand why the media was reporting possible release.




  • Guest
« Reply #28 on: Feb 14, 2011, 01:27 »
Anybody here work at TMI or know of any hiring cycles comming up? Thanks in advance for any help.


NukeWorker ™ is a registered trademark of ™, LLC © 1996-2022 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?