Help | Contact Us
NukeWorker.com
NukeWorker Menu Nozzle dams and bubble hood work

Author Topic: Nozzle dams and bubble hood work  (Read 29833 times)

0 Members and 1 Guest are viewing this topic.

Atomic_Punk

  • Guest
Re: Nozzle dams and bubble hood work
« Reply #25 on: Jan 26, 2005, 02:26 »
Exocom,

Well I bet that I have worked with you on more than one outage.  I primarily worked S/G platforms with Kris Hammond, Mike Garry, Rick Doherty, Steve Reed, and Ric Garcia. from about 89 to 2000.  I really don't see the platforms much anymore with the exception of a valve line-up or two.
So, in other words, Rick Doherty did all the work? ;)

exocom

  • Guest
Re: Nozzle dams and bubble hood work
« Reply #26 on: Jan 26, 2005, 02:41 »
Hey Atomic, that is a given from that list.

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?