Reference, Questions and Help > Lessons Learned

Tecenecium-99 PLASMA TORCH CUTTING

(1/1)

cef:
When Plasma Arch torch cutting Tc-99 mixed with U-235 /238
Are there any unforseen Industrail Hazards or Radiological Hazards
that require special consideration.

Example. It gives off a (ohmygodneum1100 ) Product When heated or cut with a torch and you should use these guide lines @#$%^^ $%^&&@# to control^%$$@#& and Prevent @#$%^&*.

Example. It has a $%&*@# and special @#$%^ controls must be used to control @#$%^& or YOU WILL FIND IT IN THE PET HAMSTER AT YOUR HOUSE.

Normal engineering and administrative controls have been in the evaluation.
I am looking for the (gotcha) . But ALL replys are welcome.

Many thanks in advance
cef

Rennhack:
My two cents:

When cutting Uranium (which is pyrophoric), some of the uranium could be vaporized.  Which gives the material a smaller particle size.  Which makes it slightly more harmful to your innards, and harder to protect against with a respirator.  Just make sure you are using a dual cartridge, for vapors and HEPA.  Also, use a HEPA unit as much as possible to suck the vapors away from the worker.

SloGlo:

--- Quote ---When Plasma Arch torch cutting Tc-99 mixed with U-235 /238
Are there any unforseen Industrail Hazards or Radiological Hazards
that require special consideration.
cef
--- End quote ---

please define "unforeseen".

moke:
Hi CEF,

You might contact the subject matter experts (SME) at Princeton University.

Have a Great Week!

Moke

Navigation

[0] Message Index