Help | Contact Us
NukeWorker.com
NukeWorker Menu ANSI Requirements? honeypot

Author Topic: ANSI Requirements?  (Read 3647 times)

0 Members and 1 Guest are viewing this topic.

Offline danthatguy

  • Very Lite User
  • *
  • Posts: 3
  • Karma: 0
ANSI Requirements?
« on: Apr 20, 2012, 12:08 »
I am a little green with only about 1000 hours in the field. What are the hour requirements for the different levels ANSI 18.1 and ANSI 3.1?
« Last Edit: Apr 20, 2012, 09:00 by danthatguy@yahoo.com »

Offline GLW

  • Gold Member
  • *
  • Posts: 5490
  • Karma: 2523
  • caveo proditor,...
Re: ANSI Requirements?
« Reply #1 on: Apr 20, 2012, 07:51 »
18.1 and 3.1,...

18.1 is obsolescent and only applies to specific facilities,...

try looking here,...

http://www.nukeworker.com/forum/index.php/topic,9266.0.HTML

been there, dun that,... the doormat to hell does not read "welcome", the doormat to hell reads "it's just business"

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?