Help | Contact Us
NukeWorker.com
NukeWorker Menu Suggestions for learning MCNP code?  

Author Topic: Suggestions for learning MCNP code?  (Read 8315 times)

0 Members and 1 Guest are viewing this topic.

Irradiated1

  • Guest
Suggestions for learning MCNP code?
« on: Aug 13, 2012, 03:02 »
I just started with a company that needs to use MCNP code to design shielding. I contacted Los Alamos and obtained the MCNP software and it's Greek to me. I want to take a course to learn it but you must have some experience working with it to take full advantange of the course. I will read all 3 manuals that came with it to start. What advise can you offer a newb trying to learn this program?

Offline SmallTownNuke

  • Very Lite User
  • *
  • Posts: 7
  • Karma: 6
  • Gender: Male
Re: Suggestions for learning MCNP code?
« Reply #1 on: Aug 13, 2012, 07:40 »
A professor I had at Kansas State wrote a primer that I found helpful back in school.  It is listed under the primers and treatises section.

http://www.mne.ksu.edu/~jks/papers.htm

Best of luck!

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?