Help | Contact Us
NukeWorker.com
NukeWorker Menu Schematic reading advice/tips

Author Topic: Schematic reading advice/tips  (Read 3773 times)

0 Members and 1 Guest are viewing this topic.

Offline eaton1981

Schematic reading advice/tips
« on: Jun 18, 2012, 09:44 »
Not that it should be too much of a problem for interviews coming up, but does anybody know of a good resource for learning how to use schematics in the civilian world? I could use a good refresher just in general, and definitely if I get into ops.

It seems like each platform I served on had schematics that had a weird way of being read a certain way compared to the other platforms' prints. and they symbols used seemed to change from platform to platform as well.

BTW, I was an EM, and yeah, I admit that I have trouble with them. Any help is appreciated.


exdiegans

  • Guest
Re: Schematic reading advice/tips
« Reply #1 on: Jul 13, 2012, 12:01 »
Try the DOE handbook ENGINEERING SYMBOLOGY, PRINTS, AND DRAWINGS at this address.

http://www.hss.doe.gov/nuclearsafety/ns/techstds/standard.html

Here's a brief description of the topics:

Module 1 - Introduction to Print Reading
This module introduces each type of drawing and its various formats. It also
reviews the information contained in the non-drawing areas of a drawing.
Module 2 - Engineering Fluid Diagrams and Prints
This module introduces engineering fluid diagrams and prints (P&IDs); reviews
the common symbols and conventions used on P&IDs; and provides several
examples of how to read a P&ID.
Module 3 - Electrical Diagrams and Schematics
This module reviews the major symbols and conventions used on electrical
schematics and single line drawings and provides several examples of reading
electrical prints.
Module 4 - Electronic Diagrams and Schematics
This module reviews electronic schematics and block diagrams. It covers the
major symbols used and provides several examples of reading these types of
diagrams.
Module 5 - Logic Diagrams
This module introduces the basic symbols and common conventions used on logic
diagrams. It explains how logic prints are used to represent a component's
control circuits. Truth tables are also briefly discusses and several examples of
reading logic diagrams are provided.
Module 6 - Engineering Fabrication, Construction, and Architectural Drawings
This module reviews fabrication, construction, and architectural drawings and
introduces the symbols and conventions used to dimension and tolerance these
types of drawings.






 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2021 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?