Help | Contact Us
NukeWorker.com
NukeWorker Menu Starting off with an MS

Author Topic: Starting off with an MS  (Read 2051 times)

0 Members and 1 Guest are viewing this topic.

DavidNuke

  • Guest
Starting off with an MS
« on: Jan 27, 2016, 09:11 »
Hello there, I've done some searching and haven't really seen this topic being discussed. I'm due to finish at a well ranked US university with a Nuclear Engineering Masters degree, with a focus in radiation detection. I have light experience with: MCNP, RELAP, and Saphire 8.

I am open to working on all light water reactors and at any detector company. I've started my job search, mostly looking at Engineer I type positions. This seems a bit typical.

What type of positions should I keep an eye out for that perhaps I didn't know I could get?

What type of certifications or skills might I consider to acquire?

Any words from those who know where one may go from starting at this level of experience is appreciated.

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2021 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?