Help | Contact Us
NukeWorker.com
NukeWorker Menu How to remove Eu-152 source from Wallac 1400 LSC?

Author Topic: How to remove Eu-152 source from Wallac 1400 LSC?  (Read 2544 times)

0 Members and 1 Guest are viewing this topic.

Silverthorn28

  • Guest
Hello, we have an old LSC, Wallac 1400. Before we can send it to disposal, we need to remove the internal calibration source Eu-152 from the instrument. Can anyone help? Or point me to the right sources for info? Many thanks in advance.

Pujing

Offline Marlin

  • Forum Staff
  • *
  • Posts: 13287
  • Total likes: 537
  • Karma: 5131
  • Gender: Male
  • Stop Global Whining!!!
Re: How to remove Eu-152 source from Wallac 1400 LSC?
« Reply #1 on: Jul 27, 2017, 10:10 »
Hello, we have an old LSC, Wallac 1400. Before we can send it to disposal, we need to remove the internal calibration source Eu-152 from the instrument. Can anyone help? Or point me to the right sources for info? Many thanks in advance.

Pujing

I don't know it this will help but it did not take a very aggressive search to find it. Wallac appears to be marketed by PerkinElmer there is an email in the letter you can probably get more information from.

http://www.perkinelmer.com/PDFs/downloads/Pellet-Return-Operation.pdf

Silverthorn28

  • Guest
Re: How to remove Eu-152 source from Wallac 1400 LSC?
« Reply #2 on: Jul 27, 2017, 10:55 »
the info is very helpful. Thank you!

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2021 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?