Help | Contact Us
NukeWorker Menu Questions Regarding Testing of Process Controls  

Author Topic: Questions Regarding Testing of Process Controls  (Read 1841 times)

0 Members and 1 Guest are viewing this topic.

Offline jmltinc

  • Lurker
  • Posts: 2
  • Karma: 0
  • Gender: Male
  • Tell Recruiters to use
Questions Regarding Testing of Process Controls
« on: Jan 20, 2018, 12:22 »
Hello Folks,

I am working on a paper regarding the in situ testing of the response time of process controls. These methods are not passive but require small, but regular deviation from normality during testing. Described in this paper are two methods of testing - one which is particularly useful for pressure sensors, but requires superficial modifications to the sensor (the vent) and slightly changes its characteristic while testing. The other varies a process itself within its set points (in particular the RCS), but allows testing of all process controls.

Can anyone point me to a specific regulation regarding variation of procedure and modification of equipment?

Thank you,


NukeWorker ™ is a registered trademark of ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?