Help | Contact Us
NukeWorker.com
NukeWorker Menu Need software for Thermo/Eberline RM25 honeypot

Author Topic: Need software for Thermo/Eberline RM25  (Read 3961 times)

0 Members and 1 Guest are viewing this topic.

Offline rodorr

  • Very Lite User
  • *
  • Posts: 3
  • Karma: 0
  • Gender: Male
  • Tell Recruiters to use NukeWorker.com
Need software for Thermo/Eberline RM25
« on: Mar 29, 2018, 10:57 »
I'm trying to locate the Windows software that was shipped with the Thermo/Eberline RM-25 Radiation Monitor. The name of the software was "WinRM25". The accompanying information would also be nice if available, "RM25 Calibration and Interface Software Operation Manual".

Thanks,

Robert Dorr

atomicarcheologist

  • Guest
Re: Need software for Thermo/Eberline RM25
« Reply #1 on: Mar 29, 2018, 05:19 »
I would contact Thermo Fisher Scientific as I believe they are the company which has the access to the information you're requesting.
If I remember correctly, that WinRM25 is simply the Ops and Cal manual for your Microsoft compatible computer.

Offline rodorr

  • Very Lite User
  • *
  • Posts: 3
  • Karma: 0
  • Gender: Male
  • Tell Recruiters to use NukeWorker.com
Re: Need software for Thermo/Eberline RM25
« Reply #2 on: Mar 29, 2018, 07:18 »
I have already contacted Thermo and the RM25 Radiation Monitor was discontinued long ago and the software is no longer available. The program "WinRM25" is the software that is required to be able to set high voltage, response time, dead time, voltage thresholds and alarm settings along with other things. It really is a needed bit of software to get the RM25 operating properly with different probes.

rodorr

atomicarcheologist

  • Guest
Re: Need software for Thermo/Eberline RM25
« Reply #3 on: Mar 29, 2018, 09:20 »
Here's the manual, for starters:

https://www.nukeworker.com/forum/index.php?topic=23096.0


and this may help with sourcing your software:




Zenoss, Inc. ______ ______ The Zenoss Enablement Series ...
https://sourceforge.net › attachment › test

Sybase is a registered trademark of Sybase, Inc. Tomcat is a trademark of the Apache Software Foundation. vSphere is a ..... Additionally, ICMP (ping) requests must be enabled because Zenoss uses them as a source of availability monitoring. ...... Monitoring Windows Servers with WinRM 25 Zenoss Enablement Series ...
« Last Edit: Mar 29, 2018, 10:03 by Atomic Archeologist »

Offline rodorr

  • Very Lite User
  • *
  • Posts: 3
  • Karma: 0
  • Gender: Male
  • Tell Recruiters to use NukeWorker.com
Re: Need software for Thermo/Eberline RM25
« Reply #4 on: Mar 30, 2018, 10:02 »
Thank you very much for the link to the manual. Since Thermo no longer supports this instrument they are of no assistance in acquiring the software as I have already spoken with them. I am hoping someone, somewhere still has an old copy of the software hanging around gathering dust and may be willing to share it with me. Thanks again.

rodorr

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?