Author Topic: Harrisburgh (Read 17728 times)

scotoma · « **Reply #25 on:** May 08, 2019, 10:10 »

The E-plan goes away approximately a year after shutdown. They have modified the rules for dry storage. VY got all their fuel in dry storage in less than 5 years. They had to build another ISFSI pad to hold all the casks. After that, the trend these days seems to that the utility turns over the license to a demolition company for immediate D&D. Good steady work if you can handle the drudgery. Probably no per diem and little overtime.

TVA · « **Reply #26 on:** May 08, 2019, 11:10 »

Iirc the decision has to be made this month

wtselig07 · « **Reply #27 on:** May 08, 2019, 12:03 »

Quote from: TVA on May 08, 2019, 11:10

Iirc the decision has to be made this month

There's only 3 vote days left this month. It's not going to happen by the end of the month. Speaker of the House Mike Turzai is blocking HB11 from coming to a vote.

TVA · « **Reply #28 on:** May 08, 2019, 07:00 »

https://www.pennlive.com/news/2019/05/tmi-to-move-ahead-with-plans-for-sept-30-shutdown-says-legislative-help-wont-come-in-time.html?outputType=amp&fbclid=IwAR2dMKY_2plmpVYgCIVSonrrbqHQ1H11H1jnfCOeDUsEIFz9zu2UJWJ4lU4

Rennhack · « **Reply #29 on:** May 08, 2019, 09:25 »

Quote from: scotoma on May 08, 2019, 10:10

The E-plan goes away approximately a year after shutdown. They have modified the rules for dry storage. VY got all their fuel in dry storage in less than 5 years. They had to build another ISFSI pad to hold all the casks. After that, the trend these days seems to that the utility turns over the license to a demolition company for immediate D&D. Good steady work if you can handle the drudgery. Probably no per diem and little overtime.

Palisades said they could do away with there ERO (most of it) 6 months after the fuel was moved to the SFP. The day they shuit down they no longer need 90% of the engineers.

Ksheed · « **Reply #30 on:** May 08, 2019, 10:22 »

What's up with people just reposting links to news articles without thought or discussion? What's this site coming to? 🤔

TVA · « **Reply #31 on:** May 09, 2019, 09:10 »

Quote from: ksheed12 on May 08, 2019, 10:22

What's up with people just reposting links to news articles without thought or discussion? What's this site coming to? 🤔

Who cares? Lots of people post links Marlin posts nothing but links. ( no offense Marlin )
No rules state nothing but links are allowed.
If the link is simply factual one can draw their own conclusion... The topic has been frequently discussed here.
Saying why all the links, why no discussion then not starting a discussion is junior high school at best.

fiveeleven · « **Reply #32 on:** May 09, 2019, 03:50 »

Sincerely trying to avoid becoming just another NW sea lawyer - But you know- if the threads are referencing the state capital of Pennsylvania - only 1 H. Change that step to require an IV sig.

GLW · « **Reply #33 on:** May 09, 2019, 05:14 »

Quote from: fiveeleven on May 09, 2019, 03:50

Sincerely trying to avoid becoming just another NW sea lawyer......

a noble quest,....

Ksheed · « **Reply #34 on:** May 09, 2019, 06:09 »

Was a tongue in cheek comment referring to a similar comment an antagonist poster had previously made to the same situation. Obviously went way over the swollen head of same poster.

If I was on a computer instead of my phone, I'd look it up and attach a link to the referenced rant. Although I assumed GLW would have beat me to it.

SloGlo · « **Reply #35 on:** May 09, 2019, 06:16 »

Quote from: fiveeleven on May 09, 2019, 03:50

..... - But you know- if the threads are referencing the state capital of Pennsylvania - only 1 H. Change that step to require an IV sig.

🤪🤪🤪🤪🤪🤪🤣🤣🤣🤣🤣

Ksheed · « **Reply #36 on:** May 10, 2019, 07:01 »

Found it.
https://www.nukeworker.com/forum/index.php/topic,41518.msg194973.html#msg194973

https://www.nukeworker.com/forum/index.php/topic,41353.msg195017.html#msg195017

GLW · « **Reply #37 on:** May 10, 2019, 07:22 »

Quote from: ksheed12 on May 09, 2019, 06:09

................Although I assumed GLW would have beat me to it.

eeeeeeeeeeeyeah,.....

I'm a bit jaded with it just now,....

But!!!!

I did see DW is posting a bit again,....

I suppose he cannot bring himself to extend to me a congratulations for Trump,....

but than I voted for Castle,...

so, he can let that go,...

TVA · « **Reply #38 on:** May 10, 2019, 09:25 »

I miss Hydro Dave

Marlin · « **Reply #39 on:** May 10, 2019, 11:37 »

Quote from: TVA on May 10, 2019, 09:25

I miss Hydro Dave

Ditto

peteshonkwiler · « **Reply #40 on:** May 13, 2019, 04:32 »

Quote from: wtselig07 on May 08, 2019, 12:03

There's only 3 vote days left this month. It's not going to happen by the end of the month. Speaker of the House Mike Turzai is blocking HB11 from coming to a vote.

Contact with your thoughts:
E-mail: mturzai@pahousegop.com

District Office
Mailing Address: 125 Hillvue Lane, First Floor , Pittsburgh, PA, 15237
Town of McCandless
Telephone: (412) 369-2230
Fax: (412) 369-2236

One could contact the head of the Consumer Affairs Committee where HB11 is currently lodged, that would be:
Roae, Brad
Chair

Contact InformationDistrictHon. Brad Roae
900 Water Street
Downtown Mall
Meadville, PA 16335
(814) 336-1136
Fax: (814) 337-7680
CapitolHon. Brad Roae
151 East Wing
PO Box 202006
Harrisburg, PA 17120-2006
(717) 787-2353
Fax: (717) 260-6505

and:

Matzie, Robert F.
Democratic Chair

Contact InformationDistrictHon. Robert F. Matzie
1240 Merchant Street
First Floor
Ambridge, PA 15003
(724) 266-7774
(412) 565-3569
Fax: (724) 266-7634
Hon. Robert F. Matzie
Aliquippa Office
Franklin Center of Beaver County, Inc.
524 Franklin Ave.
Aliquippa, PA 15001
Office Hours: Thursdays 10:00 am - 3:00 pm
(724) 375-3052
Fax: (724) 375-3058
CapitolHon. Robert F. Matzie
121 Irvis Office Building
PO Box 202016
Harrisburg, PA 17120-2016
(717) 787-4444
Fax: (717) 780-4772

TVA · « **Reply #41 on:** May 13, 2019, 07:49 »

You realize at this date it probably doesn’t matter for TMI...

peteshonkwiler · « **Reply #42 on:** May 14, 2019, 10:06 »

Quote from: TVA on May 13, 2019, 07:49

You realize at this date it probably doesn’t matter for TMI...

Whether Exelon Generation opts to close or reverse it's decision to close TMI is above my pay grade. Getting HB11 on the floor and passed should the priority, it is mine. It is bad enough for our industry to lose 14% of the PA plants due to this. It's worse for the Commonwealth to lose 6% of it's generational capacity . It it a terrible blow to the Clean Energy groups to lose 17% of their capacity.
Call, email, write... be a voice in public.

TVA · « **Reply #43 on:** May 14, 2019, 12:58 »

You missed the point. It’s already after the date for it to be put on the agenda...
Exelon cannot design and fabricate a core now..

Sure I would love to see it passed but in truth no one will lose their job over it.

GLW · « **Reply #44 on:** May 14, 2019, 04:57 »

Quote from: peteshonkwiler on May 14, 2019, 10:06

Whether Exelon Generation opts to close or reverse it's decision to close TMI is above my pay grade. Getting HB11 on the floor and passed should the priority,....

regarding TMI,...

Quote from: GLW on Apr 12, 2019, 07:50

not a very big plant,...

single unit site,...

the clean energy credits for Limerick and Peach Bottom are the pot for Exelon,...

TMI is the buy,...

peteshonkwiler · « **Reply #45 on:** May 14, 2019, 08:09 »

Quote from: TVA on May 14, 2019, 12:58

You missed the point. It’s already after the date for it to be put on the agenda...
Exelon cannot design and fabricate a core now..

Sure I would love to see it passed but in truth no one will lose their job over it.

Last outage at TMI was October 18. If they were to have an outage this year, the core would have been designed, bought, fabricated, and delivered by now. I am thinking this did not enter into the corporate thought process, except for calculating an exit strategy from that work.

TVA · « **Reply #46 on:** May 14, 2019, 10:27 »

Didnt I say that?

peteshonkwiler · « **Reply #47 on:** May 15, 2019, 08:03 »

Quote from: TVA on May 14, 2019, 10:27

Didnt I say that?

I guess, in a corporate kissing fashion. 🤵

TVA · « **Reply #48 on:** May 15, 2019, 11:54 »

Incorrecf. I said it was past the drop dead date to design and fabricate a core. Nothing corporate or kissing about it. It’s a fact.

peteshonkwiler · « **Reply #49 on:** May 15, 2019, 05:11 »

Perhaps I misunderstood and need enlightened.
With a 24 month fuel cycle, and X being breaker closed date and Y being breaker open date:
What would be the date to purchase fuel for the next fuel cycle?
What would be the fabrication date for the next fuel cycle?
What would be the delivery date for the next fuel cycle?
What would be the QA/QC sign off date for the delivered fuel for the next fuel cycle?
Thanks! Always willing to learn.