Help | Contact Us
NukeWorker.com
NukeWorker Menu Framatome implements cavitation peening at Millstone
honeypot

Author Topic: Framatome implements cavitation peening at Millstone  (Read 827 times)

0 Members and 1 Guest are viewing this topic.

Offline Marlin

  • Forum Staff
  • *
  • Posts: 17047
  • Karma: 5147
  • Gender: Male
  • Stop Global Whining!!!

Offline desertdog

  • Moderate User
  • ***
  • Posts: 56
  • Karma: 311
Re: Framatome implements cavitation peening at Millstone
« Reply #1 on: Nov 20, 2019, 06:12 »
Gotta call BS on the opening paragraph. Definitely not a first time evolution as AZZ/WSI using Mitsubishi technology performed the cavitation peening on the hot and cold legs as well as the bottom nozzles at Wolf Creek in 2016 and 2017.

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?