Help | Contact Us
NukeWorker Menu Employment as Instrument and Control Tech

Author Topic: Employment as Instrument and Control Tech  (Read 681 times)

0 Members and 1 Guest are viewing this topic.

Offline Ernsay

  • Lurker
  • Posts: 1
  • Total likes: 0
  • Karma: 0
  • Gender: Male
  • Tell Recruiters to use
Employment as Instrument and Control Tech
« on: Mar 22, 2020, 12:48 »
Hey Guys,
I'm new to the forum and wanted to pose a few questions.
I'm a Journeyman Electrician from Michigan working for a notable statewide Industrial electrical contractor as a Service Electrician.
I have an Associates in Applied Sciences degree in Electrical Technology and 6 years in the trade. However I have always wanted to work in a Nuclear power plant as an instrument control tech, so I applied a few months ago for a position at a Nuke plant down state and was surprised to get invited to take the Behavioral test, which I passed. And then the MASS test, which I also passed. Now my application heads to a review team. But I'm just wondering what types of Electronics or Instruments I should brush up on to help me be better prepared for this type of job?


NukeWorker ™ is a registered trademark of ™, LLC © 1996-2022 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?