Help | Contact Us
NukeWorker.com
NukeWorker Menu Siemens EPD1 EasyEPD for Windows Software

Author Topic: Siemens EPD1 EasyEPD for Windows Software  (Read 379 times)

0 Members and 1 Guest are viewing this topic.

Offline kd5byb

  • Lurker
  • Posts: 1
  • Karma: 0
  • Gender: Male
  • Tell Recruiters to use NukeWorker.com
Siemens EPD1 EasyEPD for Windows Software
« on: Nov 12, 2023, 09:21 »
Good morning all,

First post here - hopefully I've got it in the correct place! 

Bought several yellow EPD1 units off the e-Place and am trying to get a hold of the software used to reset them, select options, etc...  I've found the EasyEPD2 software, but it seems like this software only works for the later EPD Mk2 and up models?  I'm not really sure, my RS-232 IRDA interface won't be here for a little bit but that seems to be what the manual says.

Any help locating the older EasyEPD for Windows software would be greatly appreciated!

thanks much,
ben

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?