Help | Contact Us
NukeWorker Menu Decon Techniques

Author Topic: Decon Techniques  (Read 8039 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
Decon Techniques
« on: Dec 04, 2007, 02:49 »
Does anybody wet vacuum rather than wet mop and squeegee post drain down, prior to final decon?



I asume that if you do you keep the barrel in the cavity, have a hose hooked to it with the drain open to allow continuous draining to the floor drain, lessening the source term that would build up by filling the barrel.


  • Guest
Re: Decon Techniques
« Reply #1 on: Dec 05, 2007, 08:01 »
Bump  ;D


NukeWorker ™ is a registered trademark of ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?