Help | Contact Us
NukeWorker.com
NukeWorker Menu shielding

Author Topic: shielding  (Read 4464 times)

0 Members and 1 Guest are viewing this topic.

Offline cairnit

shielding
« on: Oct 21, 2005, 05:01 »
Hi guys...........would any of you who have worked the recent SGRPs happen to know who makes the "RAD CLAD" shielding that we used for shielding the piping at Calvert and Oconee?
Did a web search but couldn't locate this type of shielding.

Thanks for any info in advance.

Offline Piggyback Beta

Re: shielding
« Reply #1 on: Oct 21, 2005, 10:17 »
R.L. Mussman Corporation

PO Box 1200

3763 Engledow Lane, S.E.

Port Orchard, WA  98366

    Phone:  360-874-0153

    Fax:  360-874-0155
His e-mail address is: rmussman@rlmussman.com.  When we used it it had two types: low and high temperature applications.  You may want to check if Ecomass could be used, so no lead problems.  Good luck, Piggybackbeta

ageoldtech

  • Guest
Re: shielding
« Reply #2 on: Oct 24, 2005, 09:16 »
"RAD CLAD" great for small strait piping applications, but don't drop any of it. If you do it's ruined and whatever it lands on.

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2021 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?