Help | Contact Us
NukeWorker.com
NukeWorker Menu CAMs

Author Topic: CAMs  (Read 4412 times)

0 Members and 1 Guest are viewing this topic.

RadConSuper

  • Guest
CAMs
« on: Feb 09, 2006, 12:54 »
I am searching for feedback on CAMs.  Our facility primarily handles U-238 and we use Alpha 6A for airborne monitoring.  The CAMs are primarily used for monitoring stacks.  We have not been satisfied with the Alpha 6A and were looking for a CAM that is easy to use and calibrate.  We have been looking at the Canberra iCAM Alpha/Beta Air Monitor.  Does anyone have feedback regarding the iCAM or any comments about any type of user-friendly CAM for a U-238 facility? 

tonymartino

  • Guest
Re: CAMs
« Reply #1 on: May 16, 2008, 03:19 »
I know that LLNL has bought 80 units that should be installed soon. They did several test before choosing the best CAM on the market and went with Canberra.

I would check with them. Where are you located?

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2021 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?