Help | Contact Us
NukeWorker.com
NukeWorker Menu ESP1, do you need to multiply your DPM by 100/12 to get DPM/100cm2?

Author Topic: ESP1, do you need to multiply your DPM by 100/12 to get DPM/100cm2?  (Read 3986 times)

0 Members and 1 Guest are viewing this topic.

Offline fan_of_hormesis

  • Very Lite User
  • *
  • Posts: 6
  • Total likes: 0
  • Karma: 5
  • Don't Take Life Too Seriously, It Is Not Permanent
When we use ESP1, do we get DPM per the probe area (12cm), or per 100cm2?

Since we report all activity in dpm/100cm2, I was wondering if the correction factor (100/12) is built in into the ESP1 or you need to apply it manually, or does it depend on the facility?

Thanks, everybody!
Experience is something you don't get until just after you need it.

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2021 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?