NukeWorker Forum

Reference, Questions and Help => Nuke Q&A => Instrument Q&A => Topic started by: Boilermaker on Sep 19, 2008, 07:06

Title: HandeCount
Post by: Boilermaker on Sep 19, 2008, 07:06

Does anyone have a procedure for this instrument.  We have two brand new units that have been sitting for probably 4 years with no manuals, powercords, nothing.  I was asked to take a crack at using it.  Any help will be very much appreciated. 

Title: Re: HandeCount
Post by: SloGlo on Sep 19, 2008, 09:48

http://www.thermo.com/com/cda/product/detail/1,,15593,00.html

these are pretty straight forward units.  not a whole lot of procedure needed.  let me know if you need more, 'n i'll try 'n git yinz a hard copy of whatever procedure i can get my hands on.  but i'm thinking if you contact these people they'll be glad to resend you whatever hard copy you are missing.

Title: Re: HandeCount
Post by: ISOCS on Sep 23, 2008, 06:53

Slo Go is right. These are no brainer instruments. All you need is a stylus and poke around on the palm unit and you'll figure it out.

Title: Re: HandeCount
Post by: Boilermaker on Sep 23, 2008, 06:41

Yes, Slo Go I respectfully request all hardcopies or electronic for that matter, any procedures you can get your hands on.  I was able to get an electronic version of the manual from Thermo, but operating procedures would be even better.  I will return the procedure favor in the future..... ;).