NukeWorker Forum

Career Path => Training, Tests & Education => Topic started by: msmitty56 on Oct 27, 2009, 05:13

Title: in processing testing at duke power oconee station
Post by: msmitty56 on Oct 27, 2009, 05:13

hello everyone, i'm mike and have been hired as an industrial steel worker for fluor at the oconee nuclear plant in s.c. i have never had to take the (pat) or the (rwt) test, can someone give me some insight, is it hard? is there something i can study online? i really need this job as i have been laid of for 3 months and have a family to support. any help would be appreciated. i have to report for training nov 2. is this test taken on a computer? is it multiple choice?

Title: Re: in processing testing at duke power oconee station
Post by: retired nuke on Oct 27, 2009, 06:35

Quote from: msmitty56 on Oct 27, 2009, 05:13

hello everyone, i'm mike and have been hired as an industrial steel worker for fluor at the oconee nuclear plant in s.c. i have never had to take the (pat) or the (rwt) test, can someone give me some insight, is it hard? is there something i can study online? i really need this job as i have been laid of for 3 months and have a family to support. any help would be appreciated. i have to report for training nov 2.

Top of the page, there is a tab that says "Study" - leads you here: http://www.nukeworker.com/study/ (http://www.nukeworker.com/study/). You want General Employee. Might want to look over some of the HP material to familiarize yourself with some terms.

Another thread that may help - http://www.nukeworker.com/forum/index.php?topic=5062.0 (http://www.nukeworker.com/forum/index.php?topic=5062.0) -  some of the terms we use - it'd help if you understood or were familiar with some of them...

Good luck.  :)

Title: Re: in processing testing at duke power oconee station
Post by: msmitty56 on Oct 27, 2009, 06:48

THANKS SO MUCH I'LL TRY THAT. I 'VE WORKED INSIDE EASTMAN CHEMICAL COMPANY FOR FLUOR, SO THE TRAINING/ TESTING WAS DIFFERENT.

Title: Re: in processing testing at duke power oconee station
Post by: spentfuel on Oct 27, 2009, 12:23

If its the same test I have taken at Duke yes it is on-line and is multiple choice. 

And remember if the question has anything to do with plant operation call the control room.  If its radiological its usually call RP

good luck

sf

Title: Re: in processing testing at duke power oconee station
Post by: msmitty56 on Oct 29, 2009, 05:34

Quote from: msmitty56 on Oct 27, 2009, 05:13

hello everyone, i'm mike and have been hired as an industrial steel worker for fluor at the oconee nuclear plant in s.c. i have never had to take the (pat) or the (rwt) test, can someone give me some insight, is it hard? is there something i can study online? i really need this job as i have been laid of for 3 months and have a family to support. any help would be appreciated. i have to report for training nov 2. is this test taken on a computer? is it multiple choice?