NukeWorker Forum

Career Path => Nuclear Operator => Topic started by: mwdavis on Jun 20, 2011, 04:55

Title: Time to hit it
Post by: mwdavis on Jun 20, 2011, 04:55
Well, the six months of on site time working with Operations......or Spring Vacation if you prefer......is over. Fundies officially started today. I am excited to finally get going. Who knows, in a couple of years I might actually be somebody.....
Title: Re: Time to hit it
Post by: Higgs on Jun 20, 2011, 05:00
Good luck and keep us posted!

Remember, the GFES exam bank is open and available for a reason, use it.

If you need help and can't find it there, feel free to ask here.

Justin
Title: Re: Time to hit it
Post by: flblasted on Jun 21, 2011, 06:51
Good luck, work hard, and always ask questions no matter how dumb you think it might be.
Title: Re: Time to hit it
Post by: mwdavis on Jul 29, 2011, 09:58
Well....halfway through Fundies.....things are going great. Twice now exam questions have been challenged by people who need that extra point to get 100% and the questions have been thrown out. Works out well for them. Not so great for those in the class who got the question right, then saw their overall average lower through no fault of their own. Oh well....I guess that's par for the course. At least I'm still above 90%. NNPS was a long time ago (1987), but I sure remember Reactor Fundamentals being a lot more in-depth back then........Still having a hard time getting used to the fact that the moderator coefficient is allowed to go slightly positive at times........
Title: Re: Time to hit it
Post by: Starkist on Jul 29, 2011, 10:58
Quote from: mwdavis on Jul 29, 2011, 09:58
Well....halfway through Fundies.....things are going great. Twice now exam questions have been challenged by people who need that extra point to get 100% and the questions have been thrown out. Works out well for them. Not so great for those in the class who got the question right, then saw their overall average lower through no fault of their own. Oh well....I guess that's par for the course. At least I'm still above 90%. NNPS was a long time ago (1987), but I sure remember Reactor Fundamentals being a lot more in-depth back then........Still having a hard time getting used to the fact that the moderator coefficient is allowed to go slightly positive at times........

woah. What kinda plant you in?
Title: Re: Time to hit it
Post by: jams723 on Jul 29, 2011, 11:02
Quote from: Starkist on Jul 29, 2011, 10:58
woah. What kinda plant you in?


PWR right after refueling, BOL.
Title: Re: Time to hit it
Post by: Starkist on Jul 29, 2011, 11:39
Quote from: jams723 on Jul 29, 2011, 11:02
PWR right after refueling, BOL.



Im tryin hard to think this through, but I dont get it. Reactivity of the fuel rises, but what does that have to do with temp coeff? Fuel burns hotter, temp goes up, resonance absorption goes up??? It has to be really really small then. And they do more boron injection for more shut down margin then,  wouldnt they?

Title: Re: Time to hit it
Post by: jams723 on Jul 29, 2011, 11:53
It is only slighty positive and very quickly goes negative. Due to excess reactivity and having so much boron at BOL.
Title: Re: Time to hit it
Post by: HydroDave63 on Jul 30, 2011, 12:11
Quote from: mwdavis on Jul 29, 2011, 09:58
Still having a hard time getting used to the fact that the
moderator coefficient
is allowed to go slightly positive at times........

Quote from: Starkist on Jul 29, 2011, 11:39
Im tryin hard to think this through, but I dont get it. Reactivity of the fuel rises, but what does that have to do with temp coeff? Fuel burns hotter, temp goes up, resonance absorption goes up??? It has to be really really small then. And they do more boron injection for more shut down margin then,  wouldnt they?

(http://www.colgate.com/HealthyHabits/US/EN_v2/ColgateAndRIFTogether/logo_RIF.jpg)

He mentioned moderator coefficient, and you go off trying to reverse engineer Doppler!  >:(  (Yes, I'm too lazy to fetch yet another facepalm picture!)

Imagine: PWR, BOL, boron around 2500 ppm. Warm water stretches, fewer HBO3s to steal those precious neutrons, so mo neutron flux per cm2 . Fuel gets lucky like Britney Spears. Thus, warm reactor hottub water increases reactivity and is thus the shiznit.

- Apologies to anyone having learned Reactor Physics prior to the creation of Myspace -
Title: Re: Time to hit it
Post by: Starkist on Jul 30, 2011, 01:34
Quote from: HydroDave63 on Jul 30, 2011, 12:11
(http://www.colgate.com/HealthyHabits/US/EN_v2/ColgateAndRIFTogether/logo_RIF.jpg)

He mentioned moderator coefficient, and you go off trying to reverse engineer Doppler!  >:(  (Yes, I'm too lazy to fetch yet another facepalm picture!)

Imagine: PWR, BOL, boron around 2500 ppm. Warm water stretches, fewer HBO3s to steal those precious neutrons, so mo neutron flux per cm2 . Fuel gets lucky like Britney Spears. Thus, warm reactor hottub water increases reactivity and is thus the shiznit.

- Apologies to anyone having learned Reactor Physics prior to the creation of Myspace -


Lol. I was just tryin to figure it out in my had but I went and read up on it last night. Keep in mind, Im at a BWR :p

Title: Re: Time to hit it
Post by: Higgs on Jul 30, 2011, 05:47
Quote from: mwdavis on Jul 29, 2011, 09:58
Well....halfway through Fundies.....things are going great. Twice now exam questions have been challenged by people who need that extra point to get 100% and the questions have been thrown out. Works out well for them. Not so great for those in the class who got the question right, then saw their overall average lower through no fault of their own. Oh well....I guess that's par for the course. At least I'm still above 90%. NNPS was a long time ago (1987), but I sure remember Reactor Fundamentals being a lot more in-depth back then........Still having a hard time getting used to the fact that the moderator coefficient is allowed to go slightly positive at times........

That isn't a big deal.

You shouldn't compare it to NNPP. NNPP goes more in depths on some topics, commercial nukes go more in depth on others. NNPP wanted you to know all about Mr. Neutron, commercial nukes want you to know all about the coefficients..., as one example.

And later in systems you will see a separation again, as to what the NNPP thinks is important and what we think is important.

Just embrace it. :)

Justin
Title: Re: Time to hit it
Post by: mwdavis on Jul 31, 2011, 08:11
Quote from: TheHiggs on Jul 30, 2011, 05:47
That isn't a big deal.

You shouldn't compare it to NNPP. NNPP goes more in depths on some topics, commercial nukes go more in depth on others. NNPP wanted you to know all about Mr. Neutron, commercial nukes want you to know all about the coefficients..., as one example.

And later in systems you will see a separation again, as to what the NNPP thinks is important and what we think is important.

Just embrace it. :)

Justin

I am lovin' it. All good. We even get a little break from the classroom between fundies and systems. Go help with the fall outage and rake in a little extra cash, learn about high voltage switching and clearance orders.......Then hit systems when the snow begins to fall
Title: Re: Time to hit it
Post by: mwdavis on Sep 07, 2011, 05:16
Passed the Fundies exam today. Sure am glad that the hard part of licensing is behind me now......lol......
Title: Re: Time to hit it
Post by: Higgs on Sep 07, 2011, 06:10
Congrats and good luck!