NukeWorker Forum

Reference, Questions and Help => Nuke Q&A => Lessons Learned => Topic started by: Radweasel on Mar 04, 2003, 09:27

Title: Calculations
Post by: Radweasel on Mar 04, 2003, 09:27

I am trying to find a formula for "plane sources."  I also need the formula for the "transition point" also.  Ex-Navy or shipyard workers should know.  Any help will be appreciated.
Thanks,
Weasel

Title: Re: Calculations
Post by: moodusjack on Mar 04, 2003, 09:57

A simple approximation of the dose rate from a plane source based on fractions of an effective radius is as follows:

Determine the effective radius (ER) of the plane.

e.g., 20' X 30' floor yields an ER of about 14'
       (r = square root of the area divided by PI)

At distances in the range of contact with the plane and 0.1XER the dose rate is constant

At distances in the range of 0.1XER and 0.7XER the dose rate diminishes in accordance with the line source formula

At distances beyond 0.7XER the dose rate diminishes in accordance with the point source formula.

For the example above, the 0.1XER = 1.4' and the 0.7XER = 9.8'

Title: ;)Re: Calculations
Post by: SloGlo on Mar 04, 2003, 11:28

Determine the effective radius (ER) of the plane.

e.g., 20' X 30' floor yields an ER of about 14'
       (r = square root of the area divided by PI)

moodusjack....i tink it's a little more clear to say that yer r=square root of the quotient of the area divided by pi operation..... but then, today is a verrry boring day [smiley=tp.gif]
'n i'm tinkin dat radweasal's "transition point" is the 0.1 &0.7 er  points, at least that's where i wuz at before i gots off on the semantics detour.... my bad! ;)