Help | Contact Us
NukeWorker.com
NukeWorker Menu Thermo/Eberline Alpha7L CAM using a Alpha A6 remote head  
« previous next »
Pages: [1]   Go Down

Author Topic: Thermo/Eberline Alpha7L CAM using a Alpha A6 remote head  (Read 2320 times)

0 Members and 1 Guest are viewing this topic.

Offline gnuvirus

  • Lurker
  • Posts: 1
  • Karma: 0
  • Gender: Male
  • Tell Recruiters to use NukeWorker.com
Thermo/Eberline Alpha7L CAM using a Alpha A6 remote head
« on: Aug 21, 2024, 01:00 »
Hi everyone!
I have an Eberline Alpha7L CAM running Windows 2000, does anybody know if an Eberline Alpha A6 detector head will plug and play with the CAM base. Does anybody by any chance have any experience working with Eberline air monitors?
Thank you for any help you may be able to give me!
Logged
Pages: [1]   Go Up
« previous next »
 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?