Help | Contact Us
NukeWorker.com
NukeWorker Menu Teletector Audio problem

Author Topic: Teletector Audio problem  (Read 3599 times)

0 Members and 1 Guest are viewing this topic.

Offline Scottsr3

Teletector Audio problem
« on: Feb 25, 2009, 02:44 »
We have several teletectors by WB Johnson and Assoc. models 2000w and 1000w that have the same problem.
The readings are affected by whether or not you have the audio on. We normally calibrate them with the audio off, so haven't noticed this until recently.
I checked our other units and some of them behave the same way. On certain ranges the audio causes the readings to double or triple.
I know it is noise/crosstalk, but am just wondering if anyone has seen this before. The audio on these is a 140VAC burst, not sure why, but the noise can be seen all over the circuit.

Offline makua13

Re: Teletector Audio problem
« Reply #1 on: Mar 09, 2009, 07:51 »
Change the electrolytic capacitor to clean up the DC
Live Aloha

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2021 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?