Help | Contact Us
NukeWorker.com
NukeWorker Menu What ANSI calibration standard are you using? N323 or N42.17A

Author Topic: What ANSI calibration standard are you using? N323 or N42.17A  (Read 6228 times)

0 Members and 1 Guest are viewing this topic.

Irradiated1

  • Guest
What calibration stardard are you using? I've been asked to get our cal lab to meet N42.17A. Just looking for some insight. Thanks

Offline Dave Warren

  • Radiological Engineer
  • Very Heavy User
  • *****
  • Posts: 2909
  • Total likes: 16
  • Karma: 1561
  • Gender: Male
  • Cubs vs. White Sox in the Series this year.
Who has an N323 copy they might like to share with a nuclear brother?

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2021 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?