Help | Contact Us
NukeWorker.com
NukeWorker Menu FME 1 Zones on the Refuel Floor

Author Topic: FME 1 Zones on the Refuel Floor  (Read 5769 times)

0 Members and 1 Guest are viewing this topic.

Melrose

  • Guest
FME 1 Zones on the Refuel Floor
« on: Dec 04, 2007, 02:54 »
What is your experience regarding the location (at the handrails, the entire floor, 3' off the rails, whatever) of the FME 1 zone on the refuel floor?  What plant?
What type of buffer, width, postings, control, etc?
« Last Edit: Dec 04, 2007, 02:56 by Melrose »

Melrose

  • Guest
Re: FME 1 Zones on the Refuel Floor
« Reply #1 on: Dec 05, 2007, 07:58 »
bump  ;D

Offline GLW

Re: FME 1 Zones on the Refuel Floor
« Reply #2 on: May 15, 2012, 07:22 »
Take a look at this and pause it at 1:08, note the observer with at least three earrings in his left ear on the right side of the screen.

Does FME vary that much from plant to plant that multiple earrings are allowed in the exclusion zone around the SFP or cavity at some facilities?

I have not worked at one that did allow earrings, but I've been DnD'ing a long time and perhaps things have relaxed a bit,....



(sic)

been there, dun that,... the doormat to hell does not read "welcome", the doormat to hell reads "it's just business"

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2021 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?