Help | Contact Us
NukeWorker.com
NukeWorker Menu Measuring skin dose estimates with a GM pancake?

Author Topic: Measuring skin dose estimates with a GM pancake?  (Read 5171 times)

0 Members and 1 Guest are viewing this topic.

Irradiated1

  • Guest
Measuring skin dose estimates with a GM pancake?
« on: May 07, 2009, 07:05 »
Ludlum Measurements detector efficiencies are 4pi. How do work the formula when scanning for skin contamination that is 2pi?

Offline SloGlo

  • meter reader
  • Very Heavy User
  • *****
  • Posts: 5830
  • Karma: 2646
  • Gender: Male
  • trust me, i'm an hp
Re: Measuring skin dose estimates with a GM pancake?
« Reply #1 on: May 07, 2009, 10:17 »
take your 4 pi efficiency 'n multiply by 2.
quando omni flunkus moritati

dubble eye, dubble yew, dubble aye!

dew the best ya kin, wit watt ya have, ware yinze are!

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?