Laser gun makes the cut in decommissioning

[Marlin]

Laser gun makes the cut in decommissioning

Independent research and technology group TWI is working with the UK's Nuclear Decommissioning Authority (NDA) and various site licence companies to develop laser cutting technologies for dismantling and size reduction applications during plant decommissioning.

One of the technologies TWI has developed is a hand-held laser for cutting up metallic structures - such as piping, vessels and support structures - in low-hazard environments.

The group has also developed laser technology for remote in-situ dismantling using a 'snake-arm' robotic manipulator. It has also worked with Sellafield on lasers that can be used for cutting up redundant fuel skips so that more can be packed into waste containers.

While initially developed for use in the UK, TWI says that the laser technologies have attracted interest from Europe, the USA and Japan.

According to TWI, "A challenge common to all nuclear installations is the dismantling and size reduction for cost-effective storage of contaminated metallic infrastructures." Laser cutting, which can be performed in both air and underwater, "offers significant economic, technical, operational and societal benefits compared to competing techniques."

In previous work, the NDA awarded a contract to TWI in March 2009 to develop prototype equipment for demonstrating a laser that could both cut steel tubing and remove the surface layer of contaminated concrete.


http://www.world-nuclear-news.org/WR-Laser_gun_makes_the_cut_in_decommissioning-0410134.html?goback=%2Egde_2530360_member_5792986728855789572#%21

[peteshonkwiler]

I'm somewhat disappointed in this.  I got into an interesting discussion about 18 years ago with a young physics student, who was working on his PhD, I believe.  I was in a little  blues bar in Alabama with a work colleague,enjoying the music and the chit chat of the barmaid; she claimed the place used to be a whore house.  Anyway, this young man caught some of our work talk and asked what we did.  That's always an alerting question, but he understood.  Anyway, he talked about a project he had been involved with that was studying decreasing the half life of radioactive decay by lasing.  We chatted for a bit, then he went on his way and we went back to querying the barmaid about the whore house aspects.  I occasionally catch some bits of this research getting better results, and thought this article discussed a real world application. Alas.

[vikingfan]

https://www.youtube.com/watch?v=E3YCACZQ72Q&feature=youtube_gdat

[Marlin]

   Cool video but I have been thinking about the Flame Permit for a DOE site in general. The Safety departments I have worked with don't like issuing them in the first place, I bet they would have a real hard time with this not to mention Industrial Hygiene on anything with lead paint.