Help | Contact Us
NukeWorker Menu

Reactor Head / Cavity

Started by Rennhack, Dec 28, 2003, 06:03

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Rennhack

Reactor Head / Cavity

The purpose of this forum is to document on-the-job work experiences. Submit your best solutions for various jobs and processes. This is not to be plant specific, rumor, slander or urban legend. Postings will be reviewed, verified, edited for content, and archived for future reference. Post a summary for review if you wish to post a thesis or position paper. We are getting fewer and fewer, but before the knowledge is lost forever and plant / sites reinvent the wheel; we need to document what we have learned.

Meltdown

If you're pulling CRDMs and somebody from Lynchburg tells you the water that ran out is condensation, they're lying. It's just what you thought it was.

If they tell you their encapsulation methods will hold any remaining liquid while the head tips over, call the deconners and stage lots of absorbent between them and the open equipment hatch.

And lastly, if anyone tells you they have a plan for inclement weather while they skid it out, get booties for everyone outside.

Not that any of this would happen again...
Meltdown

"I know that there is an eye that watches all of us. There is a judgment that weighs everything we do. And before this great force, which is greater than any government, I stand in awe and I kneel in respect." L. Cohen

SloGlo

always, always, always  keep your meter window open, until you need to close it for attenuation purposes.
quando omni flunkus moritati

dubble eye, dubble yew, dubble aye!

dew the best ya kin, wit watt ya have, ware yinze are!

moke

Eh Sloglo,

Good one!

There are many today that still survey trash bags and other items and fail to include the Beta component.

Our job is to detect trends and abnormalities and the Damn EXTENT. You aint got no Beta if you don't look for it!

Don't fall in the trap.

Additonally, most ion chambers are equipped with a phenolic ring and dense window to compensate for Beta such as the 2.2 MeV B from Y-90. If in doubt, check it out by contacting your instrument specialist.

Have an Awesome Week!

Moke

Mike_Koehler

Just one thought.... If you even suspect that they might drain the cavity within the next shift or so , do 2 things. 1) pay attention cause sometimes Ops lies to you   :o  and 2) if they do start to drain the cavity without telling you, make damn sure the cavity lights are turned off before they burn up.
"Calling an illegal alien an "undocumented
  immigrant" is like calling a drug
  dealer an "unlicensed Pharmacist."
unknown
"If you seal the borders and you stop giving federal benefits to people who are in the country illegally... many of them will simply go home."
Lou Barletta, Mayor of Hazelton, Pa.

luckyu

Make sure HEPA hoses and air samples (tygon tubing) are removed from the cavity prior to flooding up.

Mike_Koehler

1) HEPA units are not the best choice for moving water.
2) If you do try to move water with them, do not pretend that there is nothing wrong with the unit. This creates problems for the unsuspecting person who uses it next!!
"Calling an illegal alien an "undocumented
  immigrant" is like calling a drug
  dealer an "unlicensed Pharmacist."
unknown
"If you seal the borders and you stop giving federal benefits to people who are in the country illegally... many of them will simply go home."
Lou Barletta, Mayor of Hazelton, Pa.


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2025 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?