Help | Contact Us
NukeWorker Menu

ETMS Graduates - Info Needed

Started by Hooyah95, Dec 28, 2006, 09:21

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Hooyah95

I am trying to remember the Nuke ET 7-Step Troubleshooting procedure that they teach at ETMS.  Can anyone help me out?

Fermi2

Well here's a suggestion that works about 99.999% of the time. Ask: Is it plugged in?


Mike

War Eagle


bradfordh

1) Symptom Recognition
2) Symptom Elaboration
3) List Probable Faulty Functions
4) Localize the Faulty Function
5) Localize the Faulty Component
6) Failure Analysis
7) Retest

And before the half-split where you check goz-intos and goz-outos, verify that the power supply is putting out the correct voltage and doesn't drop out on loading.  I've seen a power inverter give the correct voltage on the output unloaded.  And when it was lightly loaded, the voltage went to zero.


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2025 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?