Help | Contact Us
NukeWorker Menu How to peak a ludlum 2200 scaler ratemeter honeypot

Author Topic: How to peak a ludlum 2200 scaler ratemeter  (Read 7441 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
How to peak a ludlum 2200 scaler ratemeter
« on: May 16, 2008, 09:48 »
I need to know how to peak this ratemeter to cesium for daily QC. I have been setting the threshold to the cesium energy of 652 then turning on the window and putting it on HV and counting for 1 minute. My readings are between 7500 and 8000. Does this sound about right to anyone?


NukeWorker ™ is a registered trademark of ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?