Help | Contact Us
NukeWorker Logo
NukeWorker Logo
NukeWorker.com
NukeWorker Menu

What ANSI calibration standard are you using? N323 or N42.17A

Started by Irradiated1, May 06, 2009, 06:21

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Irradiated1

May 06, 2009, 06:21
What calibration stardard are you using? I've been asked to get our cal lab to meet N42.17A. Just looking for some insight. Thanks

Dave Warren

#1
Feb 01, 2011, 01:51
Who has an N323 copy they might like to share with a nuclear brother?
Print
Go Up Pages1
User actions

NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2025 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?