Help | Contact Us
NukeWorker.com
NukeWorker Menu Fuel Pool Level Indicators, meeting compliance

Author Topic: Fuel Pool Level Indicators, meeting compliance  (Read 7398 times)

0 Members and 1 Guest are viewing this topic.

Offline Dondoe0

Fuel Pool Level Indicators, meeting compliance
« on: Feb 10, 2015, 06:52 »
Any one else on a Fukushima induced fuel pool level indicator job?  If so, how bumpy has your road been?

Offline Higgs

  • SRO
  • Very Heavy User
  • *****
  • Posts: 1942
  • Total likes: 5
  • Karma: 1284
  • Gender: Male
  • Life has a melody...
Re: Fuel Pool Level Indicators, meeting compliance
« Reply #1 on: Feb 10, 2015, 09:32 »
I'm not directly involved other than authorizing the drilling into my control room walls, but I'm not aware of any major issues with our install. I'll ask around.

Justin
"How feeble is the mindset to accept defenselessness. How unnatural. How cheap. How cowardly. How pathetic.” - Ted Nugent

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2021 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?