Help | Contact Us
NukeWorker.com
NukeWorker Menu Statistical counting sensitivity equation  

Author Topic: Statistical counting sensitivity equation  (Read 325 times)

0 Members and 1 Guest are viewing this topic.

Offline dmlibguard

  • Lurker
  • Posts: 1
  • Karma: 0
  • Gender: Male
  • Tell Recruiters to use NukeWorker.com
Statistical counting sensitivity equation
« on: Jan 30, 2024, 04:10 »
Hello,
I have been tasked with determining the statistical counting sensitivity for our sealed source wipe tests. The equation i have is from an old FEMA Civil Defense manual and we have some concerns about the procedure. Is there another reference that explains how to determine the sensitivity? Any Help is appreciated.

Our counting setup is a Ludlum 2200 scaler with an end window gm tube(same tube as a Ludlum 44-7) in a well.

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2024 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?