Help | Contact Us
NukeWorker.com
NukeWorker Menu Raising the Kursk
honeypot
« previous next »
Pages: [1]   Go Down

Author Topic: Raising the Kursk  (Read 8103 times)

0 Members and 1 Guest are viewing this topic.

Offline Marlin

  • Forum Staff
  • *
  • Posts: 18973
  • Karma: 5147
  • Gender: Male
  • Stop Global Whining!!!
Raising the Kursk
« on: Jul 21, 2019, 10:46 »

The use of the cutting cable and the way holes were drilled into the hull remind a little bit of cutting and lifting large blocks of steam generator dog house during generator replacements.


https://www.youtube.com/watch?v=uQJ6IMREvz8
Logged
Pages: [1]   Go Up
« previous next »
 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2025 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?