Help | Contact Us
NukeWorker Menu

US: Nuclear waste tank in Washington state may be leaking

Started by Marlin, Apr 30, 2021, 12:39

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Marlin


Mounder

"The tank had been previously emptied of pumpable liquids, leaving a small amount of liquid waste inside, the agency said. Systems in the area capture and remove contaminants that reach the groundwater and ensure the protection of the Columbia River, the agency said." 

[/size][size=78%] It'd be nice to know how many gallons are left from the original 123,000 gallon volume max capacity.   With a lot of headspace, temperature changes can create set up "dew" from remaining liquid up on the bare interior tank walls.  This will fluctuate levels.  Odds on, there were probably leaks in this old tank prior to being pumped down.[/size]


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2025 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?