Help | Contact Us
NukeWorker Menu

Feds: Firm dropped part for SC nuclear plant, covered it up

Started by Ksheed, Apr 22, 2015, 01:52

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ksheed

ATLANTA (AP) — Federal regulators proposed an $11,200 fine Tuesday against Chicago Bridge & Iron Co. because its workers dropped a prefabricated section for a new nuclear power plant in South Carolina and then tried to cover it up, officials said.

http://news.yahoo.com/feds-firm-dropped-part-sc-nuclear-plant-covered-200921934--finance.html

Marlin

   It would seem that the rigging manager and safety representative are culpable for individual enforcement as they directed subordinates to falsify documentation.

HeavyD

QuoteIt would seem that the rigging manager and safety representative are culpable

If you read the announcement, they also talk about action towards a former employee.

Care to take any guesses?  ;)

On a serious note, this actually happened in 2013.  the sub-module in question has been shipped here, inspected, found to have no defects from the drop, welded to other sub-modules and the entire module is now in its final, installed location.   


HeavyD

Sub-module of one of the building structural models.


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2025 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?