Help | Contact Us
NukeWorker.com
NukeWorker Menu Electronic Survey Software  

Author Topic: Electronic Survey Software  (Read 22645 times)

0 Members and 1 Guest are viewing this topic.

Offline Scorpio51

  • Light User
  • **
  • Posts: 12
  • Total likes: 0
  • Karma: 7
  • Tell Recruiters to use NukeWorker.com
Re: Electronic Survey Software
« Reply #25 on: May 19, 2008, 02:11 »
I've used two different versions of VSDS.  The first was OK...slow, cumbersome, but OK.  The second was worse and we dumped it 4-5 years ago. I always liked the concept of electronic maps, but there was nothing else out there, so I developed my own electronic survey data base.  Here are the basics: 

1. I did the maps using Corel and converted them into pdf.
2. I created a blank map (room for smear data, instruments, names, locations, etc.) in Corel and converted that into a pdf.
3. Make all the blank spaces interactive so you can click and type.
4. Create smears, SOPs, etc. in Corel and import them as labels.
5. Next import the map pdf into the blank as a watermark and size it to fit.

Our management could care less and I hear we're going back to VSDS next year...

Works better than VSDS, but techs still hate it because it's slower than pen and paper...

Oh well, it was fun to create.

 


NukeWorker ™ is a registered trademark of NukeWorker.com ™, LLC © 1996-2019 All rights reserved.
All material on this Web Site, including text, photographs, graphics, code and/or software, are protected by international copyright/trademark laws and treaties. Unauthorized use is not permitted. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute, in any manner, the material on this web site or any portion of it. Doing so will result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
Privacy Statement | Terms of Use | Code of Conduct | Spam Policy | Advertising Info | Contact Us | Forum Rules | Password Problem?