Image search results - "(femp)"

Fernald (FEMP) (aerial imagery)

Gas into Metal

Uranium Green Salt

Fernald Feed Materials Production Center

Cooling the Derby

Sampling the Derby

Ingots of Fernald at Ashtabula

Back to Fernald

Laundry

2012972.jpg

2012968.jpg

2012974.jpg

2012973.jpg

2012967.jpg

2012971.jpg

2012970.jpg

2012966.jpg

2012704.jpg

2012773.jpg

2012707.jpg

2012708.jpg

2012706.jpg

2012772.jpg

2012771.jpg

2012705.jpg

2012178.jpg

2012703.jpg

2012702.jpg

2012190.jpg

2012189.jpg

2012181.jpg

2012183.jpg

2012184.jpg

2012180.jpg

2012179.jpg

2012182.jpg

2012177.jpg

2012168.jpg

2012175.jpg

2012172.jpg

2012173.jpg

2012176.jpg

2012174.jpg

2012169.jpg

2012171.jpg

2012164.jpg

2012163.jpg

2012161.jpg

2012162.jpg

2012160.jpg

2011663.jpg

2012033.jpg

2011662.jpg

2011415.jpg

2012159.jpg

2011666.jpg

2011414.jpg

Workers Finish Installing a Bridge Crane in the Silos 1 and 2 Treatment Facility that will be used to Load the Waste Containers for Transportation Off Site.

Workers are Trained how to Operate the Silo 3 Excavator.

Workers are Trained to Seal the Soft-Sided Packages that will be used for the Silo 3 Waste.

Silo 3 Treatment Facility

Fernald Silo 3 Project - Shipping Preparations

Work Continues in the Three Product Fill Rooms where the Casks will be Filled Robotically with the K-65 Stabilized Waste.

Fernald Silo 3 Project - Shipping Preparations

Fernald Silo 3 Project - Waste Packaging

fernald_llrw_5.jpg

Fernald Silo 3 Project - Shipping Container

Fernald Silo 3 Project - Waste Retrieval

fernald_llrw_3.jpg

fernald_llrw_2.jpg

fernald_llrw_4.jpg

fernald_llrw.jpg

Analytical Lab Decontamination and Demolition Project - An Operating Engineer uses Grapplers to Segregate Demolition Debris that Needs Further Size Reducing from that which can be Immediately Loaded for Transfer to the On-Site Disposal Facility (OSDF).

An Operating Engineer Loads Building Debris into an Articulation Dump Truck on the Pad of the Lab Building.

Operating Engineers Topple the Last Section of Plant 8 by Pushing the Structure to the Ground.

Operating Engineers use Shears to Cut Away Sections of Plant 8.

Workers Remove Process Piping in the Pilot Plant as Part of the Demolition Process.

Workers Install Insulation on Piping in the TTA Building.

Electricians Install Various Sizes of Conduit in the Electrical Room.

The Bio-Dentrification Tower and Plants 2 and 3 Prior to Demolition.