New To Nuke Community, Need SOIT pointers and advice

[GoNe_FiSsIoN]

Hello everyone,
I am new to the nuke community having accepted a position at Plant Farley in Alabama. My question is about the curriculum for the SOIT position. I would like any info on what I may need to look into in advance, qualifications I will need to obtain, any general information that will make this a little easier. I will be an inside transfer as I work at a large coal-fired plant within the same union. I look forward to any response and thank you in advance.

[ddickey]

What position did you hold at the dirt burner?
http://nuclear.allenmurrow.com/index.php
Good site to test your knowledge

[GoNe_FiSsIoN]

Assistant Plant Control Operator

[OldHP]

Hello everyone,  I am new to the nuke community having accepted a position at Plant Farley in Alabama. My question is about the curriculum for the SOIT position. I would like any info on what I may need to look into in advance, qualifications I will need to obtain, any general information that will make this a little easier. I will be an inside transfer as I work at a large coal-fired plant within the same union. I look forward to any response and thank you in advance. 

Welcome! 

Not to sound  or critical (no pun intended), but you found this website, which contains a lot of information.  The information is available here, but you have to look!  Others may be able to answer your question directly, however, I can't!  I will say there is a wealth of knowledge already posted, but you have to take the time to search.

[Rennhack]

The information is available here, but you have to look!

If you can't find info using SOIT as a search term, try using "System Operator in Training" or looking in the operations section.

https://www.nukeworker.com/forum/index.php/board,252.0.html

The operations section has 4,085 Posts in 301 Topics.

[GoNe_FiSsIoN]

I saw a few links here and there. I was posting this thread as a navigational beacon to which I could find a start point. I did not want to dig through endless testing material that may be out of date. All of the information given so far, I am thankful for. Any additional info for this new guy would also be appreciated. 

[J00291522]

I saw a few links here and there. I was posting this thread as a navigational beacon to which I could find a start point. I did not want to dig through endless testing material that may be out of date. All of the information given so far, I am thankful for. Any additional info for this new guy would also be appreciated. 

Are you still in-processing, or have you heard back from anyone about your start date?

[GoNe_FiSsIoN]

I have a concrete start date.

[J00291522]

I have a concrete start date.

Congrats! As of Friday, so do I!!!

[GoNe_FiSsIoN]

When will you be starting? Are you a transfer or new?

[J00291522]

New, January 4th

[GoNe_FiSsIoN]

Ahh..ok. I start a bit earlier. See you on the 4th